泊利彩票注册

  • Moldmaking & Casting Materials
    Ph. 561-588-1001



    Moldmaking
    Rubbers and
    Materials
    Moldmaking Rubbers
    Casting Resin
    Shelf Life Extender
    Mold Releases
    Urethane Rubbers
    Silicone Rubbers
    Polyurethane Casting Resin
    Poly-Purge Gas Blanket Spray
    Waxes
    PVA
    Aerosols

    View our MOLD RELEASES.......................>>

    Polyurethane RTV Mold Rubber
    The 74-30 is the softest of our RTV rubbers. These rubbers can be used for making
    durable, easy releasing molds for casting gypsum plasters, waxes, cement, epoxy resins
    polyester resins along with urethane and acrylic. Proper
    mold release is needed to
    insure easy parting from the mold.

    74-30 RTV Liquid Urethane
    Mold Rubber
    Mixed 1 Part A to 1 Part B
    Working Time: 30 Minutes
    Demold Time: 24 Hours
    Hardeness, Shore A: 30

    Info: Our softest polyurethane. Fairly soft and stretchable. Good for molds with complex shapes or detail that might require an easily flexible rubber.

    Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

    74-30 Is Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-74301
    16oz Kit (8oz A + 8oz B)
    $15.00
    POLY-74302
    32oz Kit (2 LBs)
    $25.00
    POLY-74303
    2 Quart Kit (4 LBs)
    $42.00
    POLY-74304
    1 Gallon Kit (8 LBs)
    $70.00
    POLY-74305
    2 Gallon Kit (16 LBs)
    $114.00
    POLY-74306
    10 Gallon Kit (80 LBs)
    $430.00

    Kit sizes above show total volume included in kit
    with total weight in parentheses.


    Product Data Sheets
    74-30 Product Bulletin

    74-30 Part A-- MSDS
    74-30 Part B-- MSDS

    75-60 RTV Liquid Urethane
    Mold Rubber

    Mixed 1 Part A to 1 Part B
    Working Time: 15 Minutes
    Demold Time: 12 Hours
    Hardness, Shore A: 60

    Info: A medium hardness polyurethane. Similar in hardness to a pencil eraser. The cured rubber will flex but has very little stretchability.

    Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

    75-60 Is Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-75601
    16oz Kit (8oz A + 8oz B)
    $15.00
    POLY-75602
    32oz Kit (2 LBs)
    $25.00
    POLY-75603
    2 Quart Kit (4 LBs)
    $42.00
    POLY-75604
    1 Gallon Kit (8 LBs)
    $70.00
    POLY-75605
    2 Gallon Kit (16 LBs)
    $114.00
    POLY-75606
    10 Gallon Kit (80 LBs)
    $430.00

    Kit sizes above show total volume included in kit
    with total weight in parentheses.

    Product Data Sheets
    75-60 Product Bulletin

    75-60 PART A -- MSDS
    75-60 PART B-- MSDS

    75-80 RTV Liquid Urethane Mold Rubber
    Mixed 2 Parts A to 1 Part B
    Working Time: 45 Minutes
    Demold Time: 24 Hours
    Hardness, Shore A: 80

    Info: A very hard polyurethane rubber. Very close in hardness to a car tire. Best for flat molds with minimal detail. Also can be used for certain concrete stamping applications.

    Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

    75-80 Is Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-75801
    24oz Kit (16oz A + 8oz B)
    $21.75
    POLY-75802
    48oz Kit (3 LBs)
    $37.25
    POLY-75803
    3/4 Gallon Kit (6 LBs)
    $60.50
    POLY-75804
    1 1/2 Gallon Kit (12 LBs)
    $97.50
    POLY-75805
    3 Gallon Kit (24 LBs)
    $166.50
    POLY-75806
    15 Gallon Kit (120 LBs)
    $620.00

    Kit sizes above show total volume included in kit
    with total weight in parentheses.

    Product Data Sheets
    75-80 Product Bulletin

    75-80 PART A -- MSDS
    75-80 PART B-- MSDS

    75-90 RTV Liquid Urethane Mold Rubber
    Mixed 2 Parts A to 1 Part B
    Working Time: 10 to 15 Minutes
    Demold Time: 24 Hours
    Hardness, Shore A: 90

    Info: 75-90 is our hardest and strongest polyurethane rubber. It is used for making tough, durable molds, liners and stamps for casting, forming and texturing concrete. This firm rubber is also popular for making industrial parts, rollers, gaskets, bumbers, pads, and more.
    If tinting this rubber is desired, we sell a selection of tinting colors here:
    COLORED PIGMENTS

    Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

    75-90 Is Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-75901
    24oz Kit (16oz A + 8oz B)
    $23.00
    POLY-75902
    48oz Kit (3 LBs)
    $39.00
    POLY-75903
    3/4 Gallon Kit (6 LBs)
    $63.50
    POLY-75904
    1 1/2 Gallon Kit (12 LBs)
    $102.50
    POLY-75905
    3 Gallon Kit (24 LBs)
    $175.00
    POLY-75906
    15 Gallon Kit (120 LBs)
    $685.00

    Kit sizes above show total volume included in kit
    with total weight in parentheses.

    Product Data Sheets
    75-90 Product Bulletin

    75-90 PART A -- MSDS
    75-90 PART B-- MSDS


    Polygel 35
    Self Thickening RTV Liquid Urethane Rubber For Brush-On Molds
    Polygel mold rubbers consist of two liquids, Part A and Part B which after mixing immediately gel to a brushable or trowellable consistency, then cure overnight at room temperature to a flexible, tough RTV rubber. They are ideal for molds built up with a brush, spatula or spray, Polygel mold rubbers are recommended for evaluation as a mold material for plaster, cement and waxes, as well as for limited casting with polyester epoxy and polyurethane resins.

    Poly Gel 35
    Mixed 1 Part A to 1 Part B
    Hardness, Shore A: 35
    Working Time: 8 to 10 Minutes
    Demold Time: 24 Hours

    Info: A self-thickening brushable mold rubber. Used primarily for blanket molds. Usually requires a mother mold backing to support the mold after it is made. Plaster or fiberglass and resin are commonly used for mother molds.

    Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-GEL351
    16oz Kit (8oz A + 8oz B)
    $15.25
    POLY-GEL352
    32oz Kit (2 LBs)
    $25.50
    POLY-GEL353
    2 Quart Kit (4 LBs)
    $42.50
    POLY-GEL354
    1 Gallon Kit (8 LBs)
    $71.00
    POLY-GEL355
    2 Gallon Kit (16 LBs)
    $120.00
    POLY-GEL356
    10 Gallon Kit (80 LBs)
    $483.00


    Product Data Sheets
    PolyGel 35 Product Bulletin

    PolyGel35 Part A -- MSDS
    PolyGel35 Part B-- MSDS



    TinSil 70 Series RTV Silicone Mold Rubbers
    Consists of a liquid Part B base and Part A accelerator which after mixing at the proper ratio by weight, cure at room temperature to a flexible high tear strength RTV silicone rubber. All TinSil 70 Series mold rubbers are tin-catalyzed, condensation-cure systems. They are ideal for molds where easy release or high temperature resistance is needed. They are recommended for evaluation as mold materials for polyester, epoxy and polyurethane resins and waxes. Mold release is not required for casting parts in silicone molds. A mold release wax may be needed when pouring the liquid silicone rubber onto a porous substrate such as wood or plaster. Should not be used with silicone based releases or lubricants.
    70-25 Tin-Sil
    RTV Silicone Mold Rubber

    Mixed 10 parts B to 1 part A
    Hardness, Shore A: 25
    Pour Time: 60 min.
    Demold Time: 24 Hours
    Cured Color: Light Blue

    Info: A very soft and stretchable silicone rubber. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

    Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-70251
    16oz Kit (1LB)
    $ 26.50
    POLY-70252
    32oz Kit (2LB)
    $ 41.00
    POLY-70253
    Gallon Kit (9LB)
    $ 123.00
    POLY-70254
    5 Gallon Kit (44LB)
    $ 421.00


    Product Data Sheets
    70-25 Product Bulletin

    Tinsil 70 Series -- MSDS

    70-60 Tin-Sil
    RTV Silicone Mold Rubber

    Mixed 20 parts B to 1 part A
    Hardness, Shore A: 60
    Pour Time: 30 min.
    Demold Time: 24 Hours
    Cured Color: Red

    This mold rubber is well suited for casting low-temperature melting metals such as pewter. This rubber has a lower tear strength compared to the 70-25 but can withstand higher temperatures upto 400 degrees.

    Info: A more rigid silicone rubber similar to the hardness of a pencil eraser. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

    Available in 2 Part Kits
    Cat No.
    Description
    Price
    POLY-70601
    1LB Kit
    (approx. 1 Pint)
    $ 28.00
    POLY-70602
    2LB Kit
    (approx. 1 Quart)
    $ 43.00
    POLY-70603
    8.4LB Kit
    (approx. 1 Gallon)
    $ 123.00
    POLY-70604
    42LB Kit
    (approx. 4-1/2 gallons)
    $ 449.00


    Product Data Sheets
    70-60 Product Bulletin

    Tinsil 70 Series -- MSDS

    Poly Latex 60
    One Part Brush-On Rubber for Casting Plaster, Concrete, and Some Resins.

    Built up in multiple layers with thin coats. Previous layers must be allowed to cure before recoating.
    Poly Latex 60
    Cat No.
    Description
    Price
    POLY-L603
    5 Gallon (40 LBs)
    $205.00

    Please Note: Poly Latex is capable of freezing at low temperatures (below 45F). We do not recommend shipping by UPS Ground during winter months.

    Product Data Sheets
    Latex 60 Product Bulletin

    Latex 60 -- MSDS


    Hydrogel-Alginate
    Mixed 3 Parts Water to 1 Part Hydrogel By Weight.
    • Easy to Use, Just Add Water
    • Variable Working Time
    • Non-Toxic, OK-for Body Casts
    • Early Strength for Fast Demold

    DESCRIPTION: Hydrogel® is a dry white powder which when mixed with water at a 3 parts water to 1 part Hydrogel® weight ratio (approximately 1 water to 1 1/4 Hydrogel® by volume) yields a creamy mix with a 5 minute working time. Demolding can be done, with care, several minutes after mix can no longer be worked.
    Mold Release: Use petroleum jelly for skin contact or
    Poly-2300 aerosol spray for industrial parts.

    Available in Pound Increments
    Cat No.
    Description
    Price
    POLY-HYD01
    1 LB Tub
    (approx 1/3 gallon)
    $ 14.50
    POLY-HYD02
    2 LB Tub
    (approx. 3/4 gallon)
    $ 25.00
    POLY-HYD12
    12.5 Pound Pail
    (approx. 5 gallons)
    $ 116.00


    Product Data Sheets
    Hydrogel Product Bulletin

    Hydrogel -- MSDS

    Easy-Flo 60
    Low-viscosity polyurethane casting resin.
    • 2.5 Minute pot life
    • 30 Minute Demold Time.
    • Cured Color: White/Off-White

    This fast setting casting resin creates a hard yet strong plastic for many uses.

    It can be tinted with any of our
    colored pigments, however color will be offset by the natural white color of the product.

    Extremely fluid for all types of casting.
    Favorable strength and low-brittleness.

    No Mold release is necessary for casting into silicone molds.
    Pol-Ease 2300 should be used as a release from polyurethane molds.

    Sold in 2 Part Kits : Mixed 1 to 1
    Cat No.
    Description
    Price
    POLY-EF601
    16oz Kit
    $ 12.95
    POLY-EF602
    32oz Kit
    $ 22.25
    POLY-EF603
    2 Quart Kit
    $ 35.50
    POLY-EF604
    1 Gallon Kit
    $ 58.50
    POLY-EF605
    2 Gallon Kit
    $ 103.00
    POLY-EF606
    10 Gallon Kit
    $ 397.00

    Kit sizes above show total volume included.

    Product Data Sheets
    Easy Flo 60 Product Bulletin

    EasyFlo 60 -- MSDS

    Plasteline Clay
    Plasteline clay is a non-drying, non-hardening, no-sulfur modeling clay for a variety of applications. It is non-toxic, sanitary, and odorless. This clay is easy to handle and work with and remains hand-pliable at room temperature. Keeps its smooth, firm consistency and retains the shape into which it is molded. Has many uses for sculpting, shaping or moldmaking

    Pale green in color
    Each 2LB Block is approx: 5" x 2.5" x 2.5" in size.
    Cat No.
    Description
    Price
    KLY-02
    2 LB Block
    $8.00/Block
    KLY-50
    40 LB Pack (40lbs)
    $143.00


    MSDS
    Klean Klay -- MSDS

    Poly-Purge
    Aerosol Dry Gas Blanket for extending the life of polyurethane rubbers.
    Usage:
    Poly Purge can be sprayed into an open container just before resealing the lid to displace moist air, thus extending the life of polyurethane liquids. Poly Purge is heavier that air and is nonflammable and non-ozone depleting. It is packaged in an aerosol-type can for directing the gas into the desired space.

    Sold by the can or by the case of 12 cans
    Cat No.
    Description
    Price
    POLY-P10
    10oz Can
    $ 14.50
    POLY-P10CSE
    Case of 12 Cans
    $ 150.00


  • search for

    Variety show

    image

    Finance

    Buy a car

    Premier League

    Celebrity

    Application Essentials

    aviation