泊利彩票注册

  • Powdered Resin Fillers &
    Fiberglass Additives
    Ph. 561-588-1001

    Click here for our page of West System Brand Fillers and Additives

    Aerosil-Cabosil
    (Fumed Silica) ( Aer-o-sil 200 )
    Thickening agent for epoxies, polyesters, and urethanes. Thicken resins to your own taste by adding varying amounts. Ideal for making adhesives and putties for gluing wood, fiberglass, stone, concrete, etc. However, adding this product will make the cured resin much more difficult to sand.
    Cat No.
    Size
    Net Wt.
    Price
    FL-AER010
    QT
    2oz
    $3.70
    FL-AER025
    2 1/2 QT
    4oz
    $5.45
    FL-AER050
    5 QT
    8oz
    $7.90
    FL-AER400
    4GAL
    1.7LB
    $22.95
    FL-AERBG
    10LB Bag
    -
    $67.00
    (rule of thumb for purchasing: 1 quart of resin will need about 1 quart of Aerosil to make a mayonnaise like viscosity)
    3M Glass Bubbles
    These hollow glass microspheres can be added to any epoxy and polyester resin. These bubbles will make a lightweight, easy sanding putty for minor surface filling of cracks, holes, etc. (Color: White)
    Cat No.
    Size
    Net Wt.
    Price
    FL-3M010
    QT
    2oz
    $4.15
    FL-3M025
    2 1/2 QT
    5oz
    $6.65
    FL-3M050
    5 QT
    12oz
    $10.25
    FL-3M400
    4GAL
    2.5 LB
    $34.75
    FL-3M80B
    40 LB Box
    -
    Call
    Q-Cells
    Inorganic hollow spheres added to resins that will allow for a smoother paste than glass bulbs. Can be used with polyesters or epoxies to fill surface holes and allow for easy sanding. Not for use below waterline. (Color: White)
    Cat No.
    Size
    Net Wt.
    Price
    FL-QC010
    QT
    3oz
    $3.95
    FL-QC025
    2 1/2 QT
    7oz
    $6.45
    FL-QC050
    5 QT
    14oz
    $9.95
    FL-QC400
    4GAL
    3 LB
    $33.50
    FL-QC35B
    35 LB Box
    -
    Call
    Phenolic Microballoons
    (BJO-0930)
    These red/purple color phenolic spheres when mixed with epoxy resins will create a low density paste compound which will sand easily and improve strength/flexibility of the cured resin. Better for large gap filling.
    Cat No.
    Size
    Net Wt.
    Price
    FL-PH010
    QT
    4oz
    $7.60
    FL-PH025
    2 1/2 QT
    9oz
    $15.25
    FL-PH050
    5 QT
    1 LB
    $21.95
    FL-PH400
    4GAL
    4 LB
    $69.95
    FL-PH26B
    26 LB Box
    -
    Call
    ** Use with epoxy resins only**
    SM Fairing Compound
    Blend of multiple fillers that when mixed with epoxy resins are ideal for multipurpose fairing, filling and sanding. Good for fine and large surface filling that needs a easy sanding, creamy putty.
    (Color: Light Red/White)
    Cat No.
    Size
    Price
    SM-FC010
    QT
    $4.85
    SM-FC025
    2 1/2 QT
    $7.95
    SM-FC050
    5QT
    $12.75
    SM-FC400
    4GAL
    $42.50
    ** Use with epoxy resins only**
     (1 quart of epoxy will require approximately 2 quarts of fairing compound to make a peanut butter-like viscosity)
    1/32" Milled Fiber
    Milled fiberglass powder added to epoxies and polyesters to increase strength of putty and add surface toughness/hardness.
    Cat No.
    Size
    Net Wt.
    Price
    SM-MF005
    Pint
    16oz
    $4.95
    SM-MF010
    QT
    2 LB
    $8.75
    SM-MF025
    2 1/2 QT
    5.5 LB
    $18.50
    SM-MF050
    5QT
    11 LB
    $31.00
    SM-MF500
    50LB Bag
    50 LB
    $132.50
    1/4" Chopped Strand
    This material consists of 1/4" chopped fiberglass. Used to increase strength especially in tight corners.
    Cat No.
    Size
    Price
    SM-CH141
    1 LB Tub
    $3.85
    SM-CH142
    2 LB Tub
    $6.70
    SM-CH144
    4 LB Tub
    $11.85
    SM-CH145
    10 LB Bag
    $26.00
    SM-CH146
    50 LB Box
    $106.00
    (one LB is approximately 1-quart volume)
    1/2" Chopped Strand
    Longer strands than the 1/4" and will provide a coarser mixture that will also give a stronger reinforcement.
    Cat No.
    Size
    Price
    SM-CH121
    1 LB Tub
    $4.35
    SM-CH122
    2 LB Tub
    $7.15
    SM-CH124
    4 LB Tub
    $12.85
    SM-CH125
    10 LB Bag
    $28.00
    SM-CH126
    40 LB Box
    $90.00
    (one LB is approximately 1-quart volume)
    ATH - Alumina Trihydrate
    Hydrated aluminum powder can be added to epoxy, polyester and urethane resins for dispersing heat while resin cures in larger castings. (Color: White)
    Cat No.
    Size
    Price
    SM-ATH1
    1 LB Tub
    $3.80
    SM-ATH2
    2 LB Tub
    $6.50
    SM-ATH4
    4 LB Tub
    $11.90
    SM-ATH5
    10 LB Tub
    $22.00
    SM-ATH6
    50 LB Box
    $72.50
    (one LB is approximately 1-pint volume)
    Talc
    Lowest cost filler for thickening polyester and epoxy resins but will add significant weight over fillers such as cabosil. Talc also can be applied to skin to help prevent itching when working with fiberglass. (Color: White)
    Cat No.
    Size
    Price
    SM-TAL01
    5 LB Tub
    $6.75
    SM-TAL50
    50 LB Bag
    $37.00
    (five LBs is approximately a half gallon volume)
    Cotton Flock
    This milled cotton fiber is used as a structural filler with epoxy to create a "flox" putty used in structural joints and to reinforce sharp corners or where good dimensional stability is needed. This "flox" mixture will also create a hard finish when cured which is good for creating hard points. Use the mixed epoxy flox putty in corners before applying your epoxy and cloth.

    Mix Ratio: Approx 2 parts flock to 1 part epoxy by volume

    Average Fiber Length: 320 Microns
    Average Fiber Width: 10 to 25 Microns

    (Color: White)


    Cat No.
    Size
    Net Wt.
    Price
    FL-FX010
    QT Tub
    1/3 LB
    $4.35
    FL-FX025
    2 1/2 QT Tub
    1LB
    $8.20
    FL-FX050
    5 QT Tub
    2LB
    $12.75
    FL-FX400
    4GAL Pail
    5LB
    $23.95
    FL-FX35B
    50 LB Bag
    50LB
    $161.00

    EverTex Non-Skid Additive
    Polymer particles that can be added to your resin, gelcoat, epoxy or any type of paint to provide a non-skid/anti-slip surface. Commonly used on boat decks and flooring applications.
    Since this is a plastic polymer-based particle, they will not wear away like sand-based or walnut based additves.

    Typical Mix Ratio: 4 parts resin/paint to 1 part EverTex additive by volume.

    Available in 3 different particle sizes
    COARSE: Feels like 24 Grit Sandpaper
    MEDIUM: Feels like 60 Grit Sandpaper
    FINE: Feels like 100 Grit Sandpaper

    (Color: White)
    COARSE Grade
    Feels Like 24 Grit Sandpaper
    Good for areas where extreme grip is necessary. May be uncomfortable on bare feet. Used primarily in areas where shoes are worn.
    Cat No.
    Size
    Net Wt.
    Price
    USC-EX-2008
    8oz
    3.2oz
    $7.50
    USC-EX-2016
    Pint (16oz)
    6.4oz
    $12.50
    USC-EX-2032
    Quart (32oz)
    12.1oz
    $17.50
    USC-EX-2100
    Gallon
    3 LB
    $47.50
    USC-EX-2400
    4-Gallon Pail
    11 LB
    $135.00

    MEDIUM Grade
    Feels Like 60 Grit Sandpaper
    Good all-around choice. Good grip but not too rough on bare feet.
    The larger particles of Medium grade will provide good slip resistance when using a thicker viscosity coating such as gelcoat.
    Cat No.
    Size
    Net Wt.
    Price
    USC-EX-6008
    8oz
    3.2oz
    $7.50
    USC-EX-6016
    Pint (16oz)
    6.4oz
    $12.50
    USC-EX-6032
    Quart (32oz)
    12.1oz
    $17.50
    USC-EX-6100
    Gallon
    3 LB
    $47.50
    USC-EX-6400
    4-Gallon Pail
    11 LB
    $135.00

    FINE Grade
    Feels Like 100 Grit Sandpaper
    These are our finest particles. Used in areas where just minor amounts of slip resistance is needed.
    Cat No.
    Size
    Net Wt.
    Price
    USC-EX-9008
    8oz
    3.2oz
    $7.50
    USC-EX-9016
    Pint (16oz)
    6.4oz
    $12.50
    USC-EX-9032
    Quart (32oz)
    12.1oz
    $17.50
    USC-EX-9100
    Gallon
    3 LB
    $47.50
    USC-EX-9400
    4-Gallon Pail
    11 LB
    $135.00


  • city

    constellation

    game

    game

    Variety show

    entertainment

    car

    the weather

    Blog